EGO LM2000E - Mower Maintenance and Blade Illustrations; Blade Removal;Installation; Storage and Power Indicators

Troubleshooting
Problem
Possible Cause
Fault Position
Indicator/ Headlight Display
Test & Solution
LED on
battery
pack
Power
indicator
on mower
Headlight
Fail to start
The main switch in the
switch box cover
doesn’t work. Or the
switch actuator slides
to the underside of the
switch
Switch Box
Covers
OFF
OFF
Can be
turned on
Pull the switch lever, if there is
no activating sound of the switch,
means the switch actuator had
slide to the underside of the
switch. Open the switch box
cover, check the main switch and
switch actuator; replace the
switch box covers and re-install if
the switch actuator slides to the
underside of the switch.
PCBA is broken
PCBA in the
housing cover
Open the housing cover, replace
the PCBA
The position switch
doesn’t work
Position
Switch
Open the housing cover, check
the position switch and replace if
damaged.
Fuse is broken
Fuse in the
housing cover
OFF
OFF
Can’t be
turned on
Open the battery compartment
and replace the fuse.
5