EGO LM2000E Repair Guide Line

19. Test the new PCBA
a) Plug the three connectors to the electric contacts on the battery case.
b) Insert a full charged battery pack in to the battery case.
c) Adjust the handle to the operating position and fully extend the side rails and lock with
the side clamps.
d) Turn on the mower and obverse if the motor runs freely with correct direction.
+
_
D
PCB Assembly Replacement
71

EGO LM2000E Specifications

General

Brand	EGO
Model	LM2000E
Category	Lawn Mower
Language	English