EGO LM2000E - Page 72

• The resistor can be replaced during the PCB assembly replacement. When the mower stops
slowly without a brake. The cables may be disconnected from the feet of resistor or the
resistor may be broken. Re-solder the cables or replace the resistor.
• To replace the resistor, solder the two cables (1#, 9#) from the damaged resistor and replace
with a new one.
To Replace the Resistor
1 9
Description
Part
Number
SPEC
Resistor
4970295000
0.5ohm ±10%
60W
72