56V LITHIUM-ION CORDLESS CHAIN SAW — CS1600 25
TO INSTALL/REMOVE BATTERY PACK (Fig. 9 & 10)
NOTICE: Fully charge the battery pack before its rst use.
To Install (Fig. 9)
1. Align the ribs of the battery pack
with the mounting slots in the chain
saw’s battery port.
2. Slide the battery pack into the tool
until it snaps into position.
NOTICE: Make sure that the latch on
the chain saw snaps into place and the
battery pack is secured to the tool before
beginning operation.
To Remove (Fig. 10)
WARNING: Always be aware of
the location of your feet, children, or pets
when pressing the battery-release button.
Serious injury could result if the battery
pack falls. NEVER remove the battery
pack at a high location.
1. Hold the battery pack in the palm of your hand.
2. Press the battery release button with your thumb; the battery pack will disengage
from the latch.
3. Grasp the battery pack and remove it from the chain saw.
10
9
To Next Page
Loading...
Need help?
General
