56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2140SP/LM2140SP-FC26
SPRING-LOADED CUTTING-
HEIGHT ADJUSTMENT (Fig. 12)
WARNING: Do not at any time
make any adjustment to the lawn mower
without first stopping the motor, removing
the battery pack and waiting for the blade
to stop rotating.
WARNING: Keep your feet away
from the deck when adjusting its height.
The mower can be set to 6 cutting heights between 1-1/2” (41mm) and 4” (107mm).
Choose the proper cutting height according to the type and condition of the grass.
To raise the blade height
1. Grasp the height-adjustment lever, and move it outwards.
2. Move the lever toward the back of the mower and engage the lever in the desired
cutting-height position on the mower deck.
To lower the blade height
1. Grasp the height adjustment lever, and move it outwards.
2. Move the lever toward the front of the mower and engage the lever in the desired
cutting-height position on the mower deck.
12
Height Adjustment Lever
1
2
To Next Page
Loading...
Need help?
General
