56-VOLT LITHIUM-ION HEDGE TRIMMER ATTACHMENT — PTX5100
5
EN
READ ALL INSTRUCTIONS!
READ OPERATOR’S MANUAL
Residual risk! People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING: To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident
prevention measures.
WARNING: Be sure to read and understand all
safety instructions in this Operator’s Manual, including all
safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER,
WARNING, OR CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING: The operation of any power
tools can result in foreign objects being
thrown into your eyes, which can result in
severe eye damage. Before beginning power
tool operation, always wear safety goggles or
safety glasses with side shields and a full
face shield when needed. We recommend a
Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with
side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
Safety Alert
Indicates a potential
personal injury hazard.
Read
Operator’s
Manual
To reduce the risk of
injury, user must read the
operator’s manual.
Keep
sufficient
distance
away from
electrical
power lines
To prevent electrocution,
do not operate within 15m
of overhead electrical lines.
Contact with or use near
power lines may cause
serious injury or electric
shock resulting in death.
Noise
Guaranteed sound power
level. Noise emission to the
environment according to
the European community’s
Directive.
CE
This product is in
accordance with applicable
EC directives.
WEEE
Waste electrical products
should not be disposed of
with household waste. Take
to an authorized recycler.
Keep
hands and
feet away
from the
cutting
tool
Never attempt to operate
your power tool with one
hand. Loss of control of
the power tool resulting in
serious or fatal injury may
result. To reduce the risk
of cut injuries, keep hands
and feet away from the
cutting tool. Never attach
a moving cutting tool with
your hand or any other
part of your body.
Wear eye
and head
protection
Always wear eye and head
protection when operating
this product.
IPX5 IP Symbol
Protection against ingress
of water degree 5
V Volt Voltage
mm Millimeter Length or size
Original instructions
To Next Page
Loading...
Need help?
General
