EGO ST1500 User Manual

56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER 23
7. Place the ends of the line in two
opposite notches in the spool,
with approximately 6 in. (15 cm)
protruding (Fig. 18).
8. Align the notches of the spool from
which the lines protrude with the
eyelets in the spool retainer and
position the spool in the retainer
(Fig. 19).
9. Hold the spool and spool retainer; grasp the line and pull it to release the line
from the notch in the eyelet (Fig. 20).
20
18
6" (15 cm)
19
Eyelet
Eyelet
Notch
Notch

EGO ST1500 Specifications

General

Cutting Swath	15 inches
Line Diameter	0.095 inches
Battery	56V Arc Lithium
Motor	Brushless
Line Feed	Bump Feed
Shaft	Straight
Power Source	Battery
Battery Included	No
Charger Included	No (available separately)