EGO STA1600 User Manual

STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 35
PROBLEM CAUSE SOLUTION
The cutting
line cannot be
wound into the
trimmer head
properly.
◾
Improper cutting line is
used.
◾
We suggest that you use EGO original
nylon cutting line, see “Recommended
Cutting Line” section in this manual. If
using EGO nylon line and the problem
persists, please call EGO customer
service for advice.
◾
Grass debris or dirt has
accumulated in the
trimmer head and blocked
the movement of line
spool.
◾
Remove the battery, open the trimmer
head and clean it thoroughly.
◾
Motor is overheated due to
repeatedly operating the
line winding system.
◾
Let the string trimmer work under no
load for a few minutes to cool the motor,
then try to reload the line.
◾
Low battery charge.
◾
Charge the battery.
The cutting
line cannot be
passed through
the trimmer
head when
inserting the
line.
◾
The cutting line is split or
bent at the end.
◾
Cut the worn end of line and reinsert.
◾
The lower cover is not
released to position after
reinstalling.
◾
Attach the battery pack onto the trimmer;
press the line loading button to briefly
start the power loading to reset the lower
cover.

EGO STA1600 Specifications

General

Brand	EGO
Model	STA1600
Category	Trimmer
Language	English