EasyManuals Logo

EGO STX4500 Manual

EGO STX4500
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — STX4500 11
EN
WARNING: Always remove the battery pack from
the machine during work breaks and after finishing work.
J-1 Lock-off Lever J-2 Trigger Switch
CHANGING SPEED MODE (FIG. K)
The machine features three speed modes.
Every time press the speed mode switch, the speed mode
will change.
The speed indicator will display the active speed status:
one light for low speed, two lights for medium speed,
three lights for high speed. The low speed mode provides
better control of the machine and longer operating time
per charge.
NOTICE:
The speed mode can be set before the machine is turned
on OR during operation.
When the machine is re-started after a break, the speed
mode will return to the previous speed.
K-1 Speed Indicator K-3 Speed Mode Button
K-2
Bluetooth
®
Indicator
K-4
Battery-status
Indicator
BATTERY-STATUS INDICATOR AND SPEED
INDICATOR (FIG. K)
The battery-status indicator shows the charge level and
the working status of the battery pack, and the speed
indicator shows the working status of the machine as
shown in the chart below. The battery-status indicator
and the speed indicator will illuminate when the machine
is started OR the speed mode button is pressed.
Indicator Lights
Meaning
Battery-status
indicator
Solid green
Battery charge level of 20% to 100%
Flashing green
Battery charge level of 10% to 20%
Solid red
Battery charge level of less than 10%
Flashing red
The battery pack is nearly depleted and needs
to be charged immediately.
Solid orange
The battery pack is overheated. Cool the battery
pack until the temperature drops below 67°C.
See “ Battery High-Temperature Protection
“ below
Flashing red/
green alternately
The battery pack electronics error. Replace
the battery pack or contact EGO customer
service center. See Battery Electronics Error
Protectionbelow.
Speed indicator
(the illustration
shows the high
speed)
Solid green
The machine is working properly.
Solid orange
The machine is overheated. Cool the machine
until the temperature drops below 80°C. See
Machine High-Temperature Protection “ below.
Flashing orange
The machine is overloaded. See Machine
Overload Protection below.

Table of Contents

Other manuals for EGO STX4500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EGO STX4500 and is the answer not in the manual?

EGO STX4500 Specifications

General IconGeneral
BrandEGO
ModelSTX4500
CategoryTrimmer
LanguageEnglish

Related product manuals