EGR RollTrac - Opening and Closing Procedures; Electric Operation of the Cover; Manual Operation of the Cover

RT0001 Date: 08/04/20 Issue: 5 Page: 6 of 12
Locate the Clutch Disengagement Lever on the RH side of the cover and push the Clutch inward to
disengage the motor. Pull the cover rearward or forward as required. Before driving vehicle ensure you
re-engage the clutch.
IMPORTANT: If clutch was disengaged, callibration procedure needs to be re-run prior to electric
operation.
CLUTCH
PUSH
CLUTCH
ENGAGED
CLUTCH
DISENGAGED
Opening and Closing Procedure
Electric Closing Procedure:
Electric Opening Procedure:
Manual Opening and Closing Procedure:
NOTE: Cover should open and close smoothly. If cover does not lock or open correctly, please
refer to the trouble shooting section.
UNLOCK
OPEN
PRESS ONCE
1. Press the “UNLOCK” button on the car remote.
2. Press the front button on the EGR RollTrac side rail as shown.
1. Press the rear button on the EGR RollTrac side rail as shown.
2. Press the “LOCK” button on the car remote.
CLOSE
PRESS ONCE
1 2