HC960 Operating Instructions
12/14 Version 2.1 © ehb Errors
excepted
Bedienungsanleitung.doc • Stand/Version: 25.02.2005/00 • Layout: Gottschalk • \\Ehelec-nts-000\EHELEC\Iso 9001\Formblätter\Vorlagen
12. Important information on use
Test
Before delivering the installed HC960 to the end user, a brief functional test should
be carried out in the peripheral equipment that is to be used.
Use
This device is to be operated only in combination with the supplied accessories.
Protect the device from moisture and dust.
Cleaning should only be carried out with a slightly damp cloth and mild detergent.
Comply with the general accident prevention regulations during operation.
Safety
Do not operate the HC960 within range of strong electromagnetic fields.
Observe the temperature specifications. Protect the device especially from over-
heating.
Installation
Observe the notes of the manufacturer of the plugs and cable harnesses when in-
stalling the device.
Storage
An unused HC960 may only be stored within the temperature range -20°C to +
85°C.
Shipping
The original packaging must be used for all shipments.
Improper packaging is regarded as negligence and results in any claims for repair
under guarantee being forfeited.
Maintenance
The HC960 requires no maintenance and no special upkeep over its entire service
life.
ATTENTION!
Never use a high-pressure cleaner to clean the device.
Instruct your service personnel that any high-pressure
cleaning will cause damage and voids the warranty.
To Next Page
Loading...
Need help?
General