ehb electronics HC 960 - User Manual

.
Operating Instructions
HC 960
Version 2.1
The dissemination of information from, and reproduction of, these documents as well as the utilisation and communication of their content is not permitted
unless specifically authorised. Any infringement shall result in liability for damages. All rights are reserved, particularly with regard to the granting of
patents or registration of utility models.

ehb electronics HC 960 Specifications

General

Brand	ehb electronics
Model	HC 960
Category	Controller
Language	English

Summary

General Information and Operating Modes

Operating States

Describes the device's operational states, display functions, and initial parameter setting requirements.

HC960 Operating Modes

Explains the distinction between fully automatic and semi-automatic operating modes for the HC960.

Parameter Definitions and Settings

Meaning of Parameters

Defines key parameters like Normal RPM and Return RPM, including their purpose and permitted values.

Parameter Settings Details

Details parameters such as LOW RPM, Over RPM, Confirm Start, Passwords, and Factory Settings.

Graphical Function Representation

Parameter Programming and Termination

Programming Procedure

Outlines the steps to access and modify device parameters when the machine is at standstill.

Termination of Programming

Explains how changes are saved or retained when exiting the programming mode by switching off the device.

Chipper Control Sequences

Normal RPM = 0 Sequence

Illustrates the control sequence for the chipper when the Normal RPM parameter is set to 0.

Normal RPM > 0 Sequence

Illustrates the control sequence for the chipper when the Normal RPM parameter is greater than 0.

Operating Hours and Output Assignment

Operating Hours Counter

Describes the daily and total operating hours counters and how to reset or switch between them.

Output Assignment

Explains how to select N.O. or N.C. contacts for the feed control magnet on the HC960.

Connector Information

Amphenol Connector

Details the pin assignment for the HC960 with a 7-pin Amphenol connector.

AMP Connector

Details the pin assignment for the HC960 with a 6-pin AMP connector.

Technical Data

Important Information on Use

Safety and Handling Precautions

Covers essential test, use, safety, installation, storage, shipping, and maintenance guidelines for the device.

Cleaning and Warranty Warning

Alerts users against using high-pressure cleaners, which will cause damage and void the warranty.

Repair and Disposal Procedures

Device Repair Information

Provides instructions for returning devices for repair work, including contact details and fault description requirements.

Product and Battery Disposal

Details proper disposal procedures for the product and rechargeable batteries according to legal provisions.

Documentation and Legal Details

Documentation Information and History

Lists project details, document type, version, preparation date, author, and revision history.

Legal Information

Provides contact information for customer service and company details.