Ei Electronics Ei207 Series Instruction Manual

2
Symbol Glossary
SymbolDescription
The symbols on this page are used in accordance with EN 62368-1, IEC 60417, ISO 7000
and other applicable standards. They are used to convey information on the safe and
effective use of our devices. These symbols may be used on the device itself, on its
packaging or in associated documentation.
WEEE symbol
Indicates that the device must be taken to a recycling point when it has
reached its end of life.
Crossed Paint Brush
This indicates that the device must not be painted.
UKCA mark
This indicates that this product conforms with the relevant standards for
products sold within the United Kingdom (UK). The UKCA marking is also
found on products sold outside the UK that are designed to be sold in the UK.
End of life
This indicates the date after which the device should be replaced.
CE mark
This indicates that this product conforms with the relevant EN standards for
products sold within the European Economic Area (EEA). The CE marking is
also found on products sold outside the EEA that are manufactured in, or
designed to be sold in, the EEA.
Mobius Loop
This indicates that the packaging of this product can be recycled.
The Green Dot
This is a European trademark that indicates that the manufacturer has
contributed financially to the recycling of packaging in Europe.

Ei Electronics Ei207 Series Specifications

General

Brand	Ei Electronics
Model	Ei207 Series
Category	Security System
Language	English