21
Hush feature
When the Alarm sounds, pressing the test/hush button will immediately stop the horn (the
red LED will continue to flash). If CO is still present the horn will turn on again after about
4 minutes.
The CO Alarm can only be silenced once during a CO incident. At levels > 150ppm CO, the
CO Alarm cannot be silenced.
If an accessory is used to remotely silence the alarm, it shall only be operated when in line
of sight of the CO alarm.
AudioLINK:
AudioLINK is an added feature available in the Ei208 series only. This feature allows an
authorised person to download information from the Alarm through the use of a smart
phone App. For more information on using this feature, please refer to the relevant section
on www.eielectronics.com.
3.2 Testing your Alarm
Frequent testing of the Alarm is a requirement to ensure the Alarm is functioning.
Guidelines and best practices for testing are as follows:
1. After the system is installed.
2. Once monthly thereafter.
3. After prolonged absence from the dwelling (e.g. after holiday period).
4. After repair or servicing of any of the systems elements or household electrical works.
To Next Page
Loading...
Need help?
General
