Ei Electronics Ei207 Series Instructions

(6) If the Alarm is fitted with an RF Module, ensure that there are no problems with
the other RF interconnected Alarms and that all Alarms are housecoded correctly.
(7) Press the test/hush button to silence the Alarm.
If the CO Alarm continues to sound it is possibly defective and should be replaced
(see ‘Getting the CO Alarm Serviced’ section).
WHAT TO DO IF THE ALARM BEEPS:
The CO Alarm will beep and the amber light will flash to indicate a fault condition.
31
Fault Condition Fault Indication Action
Low Battery 1 beep with 1 amber flash
Before replacing the battery, check the ʻREPLACE UNIT BYʼ label on side of unit. If the date has been
exceeded, replace the alarm not the battery.
Replace Battery Replace Alarm
Ei207 Models
Ei208 Models
CO Alarm Fault Chart
Faulty Sensor 2 beeps with 2 amber flashes Replace Alarm Replace Alarm
End of Life 3 beeps with 3 amber flashes Replace Alarm Replace Alarm

Ei Electronics Ei207 Series Specifications

General

Brand	Ei Electronics
Model	Ei207 Series
Category	Security System
Language	English