Ei Electronics Ei262 User Manual

Testing with CO : The red alarm light flashes as soon as the Alarm detects CO, so there is no
need to retain CO in the Alarm for several minutes until it sounds.
Initialisation Time : 70 seconds. On power up red and amber lights flash momentarily to show
they are operational.
Operating Temperature : -10°C to 40°C
Humidity Range : 15% to 95% R.H. (non-condensing)
Radio Frequency : 868 MHz band
RF Power : +5dBm
Range : 100 meters (minimum) in free space (without use of the “Repeater” function)
Entering House Code Mode: Pressing and holding the House Code switch until the green light turns
red, then releasing puts the Alarm into House Code mode.
House Code Mode: The Alarm transmits and receives specific codes. The green light will flash red every
5 or 10 seconds (depending on number of units coded - up to 12 units, the flashes are every 5 seconds,
above 12 units the flashes are every 10 seconds) to indicate the number of House Coded units in the
system.
Duration of House Code Mode: Exits mode automatically after 30 minutes (Alternatively manually
exit by pressing the House Code button; this sends a RadioLINK “exit House Code” signal to all other
RadioLINK units.
30

Ei Electronics Ei262 Specifications

General

Brand	Ei Electronics
Model	Ei262
Category	Security System
Language	English