Ei Electronics Ei262 User Manual

13. ACCESSORIES
RadioLINK Professional Remote Control Switch Ei411H
(for use with models Ei161RC/164RC/166RC/Ei2110 Alarm on an Ei168RC Base & Ei262 CO Alarm only)
The RadioLINK Remote Control Switch is recommended for systems with at least one Carbon Monoxide
Alarm and one or more Smoke / Heat / Fire Alarms. It allows the user to perform the following functions
from a remote location:
LOCATE - If alarms sound press Locate to identify the source of the alarm (audibly).
HUSH - Press Hush to silence nuisance alarms.
TEST - Operate weekly to Test the alarms.
RadioLINK Professional Relay Module Ei428
This module is a device that switches an internal relay upon receipt of an alarm signal from a RadioLINK
device – useful for turning off gas valves, signalling to panels, turning on strobes etc. It is mains powered
with battery back-up.
RadioLINK Professional Base Ei168RC
The Ei262 CO Alarm can be interconnected to any Ei161RC/Ei164RC/Ei166RC/Ei2110 Smoke/Heat/
Fire Alarm on an Ei168RC RadioLINK Professional base ( provided an Ei411H Remote Control Switch
is also used).
RadioLINK Professional Alarm for the Deaf & Hearing Ei170RF
For use with RadioLINK Professional Smoke/Heat/Fire/CO Alarms. With built-in Strobe and vibration
pad.
33

Ei Electronics Ei262 Specifications

General

Brand	Ei Electronics
Model	Ei262
Category	Security System
Language	English