What to do if Eiki EK-620U Projector shows over temperature warning?
If your Eiki Projector is showing an over temperature warning, you should check for any overheating issues. Make sure the projector's vents are not blocked and the room is adequately ventilated.
What to do if Eiki Projector fan fails?
If you are experiencing fan failure with your Eiki Projector, you should check the fan functionality to ensure it is working correctly. This may involve inspecting the fan for obstructions or damage.
Why Eiki Projector image is black?
If the picture mute is on and the shutter is closed on your Eiki Projector, the image will be black. Ensure that the shutter is open to allow the image to display correctly.
What to do if Eiki EK-620U Projector lamp shuts down unexpectedly?
If the lamp on your Eiki Projector has unexpectedly shut down, the system will enter a cooling down state. Allow the projector to cool down before attempting to restart it.
How to fix no light on Eiki Projector?
If your Eiki Projector shows no light, first ensure the power cable is securely connected and the power source is working by testing it with another device. Then, restart the projector correctly and check that the Lamp Status LED is green. If you've recently replaced the lamp, try resetting the lamp connections. If these steps don't work, try replacing the lamp module. As a last resort, put the old lamp back in and have the projector serviced.
What to do if Eiki Projector lamp goes off?
If the Eiki Projector's lamp goes off, it might be due to power surges. Try re-plugging the power cord. If the Lamp 1/Lamp2 LED is flashing red, press the power button on the built-in keypad or remote to turn off the projector. If the issue persists, consider replacing the lamp module or having the projector serviced with the old lamp re-installed.
Why is my Eiki Projector remote not working?
If your Eiki Projector isn't responding to the remote control, first, point the remote directly at the projector's sensor, ensuring nothing is blocking the path. Try turning off any fluorescent lights and check the batteries are correctly installed or replace them. Also, turn off other Infrared-enabled devices nearby. If it still doesn't work, have the remote control serviced.
How to troubleshoot no sound on Eiki EK-620U Projector?
If you're not getting any sound from your Eiki Projector, first, adjust the volume of the audio source. Then, check the audio cable connection and test the source audio output with other speakers. If the problem persists, you may need to have the projector or the remote control serviced.
Why is the image on my Eiki EK-620U Projector blurred?
If the image from your Eiki Projector is blurred, try pressing the Focus button to adjust the focus. You can also press the Auto button to automatically optimize the image. Make sure the projector-to-screen distance is correct and that the projector lens is clean.
How to correct trapezoid effect on Eiki EK-620U?
If the image from your Eiki Projector is wider at the top or bottom (trapezoid effect), position the projector so it is as perpendicular to the screen as possible. Alternatively, use the Keystone H or Keystone V button on the remote control to correct the problem.
General| Contrast Ratio | 2000:1 |
|---|---|
| Zoom | Manual |
| Technology | 3LCD |
| Lamp Type | UHP |
| Resolution | 1920 x 1200 |
| Zoom Ratio | 1.5:1 |
| Keystone Correction | Vertical ±30° |
| Video Compatibility | NTSC, PAL, SECAM, HDTV (480i/p, 576i/p, 720p, 1080i) |
| Outputs | VGA |
| Projection Size | 30" - 300" |
| Noise Level | 37 dB (Normal), 29 dB (Eco) |
To Next Page
