Need help?Do you have a question about the Eiki SL II Series and is the answer not in the manual?
General| Display Technology | LCD |
|---|---|
| Resolution | XGA (1024 x 768) |
| Brightness | 2700 ANSI Lumens |
| Contrast Ratio | 500:1 |
| Lamp Life | 2000 hours (Normal Mode), 3000 hours (Eco Mode) |
| Weight | 3.4 kg (7.5 lbs) |
| Native Resolution | XGA (1024 x 768) |
| Screen Size | 30 - 300 inches |
| Projection System | LCD |
| Lamp Type | UHP |
| Input Connectors | VGA, S-Video, Composite |
| Output Connectors | VGA |
| Operating Temperature | 5°C to 35°C |
Details the mechanical aspects of the projector's operation.
Covers electrical specifications and configurations of the projector.
Describes the audio playback capabilities and components of the projector.
Highlights key improvements and new features in the SL II series projectors.
Lists essential safety precautions and warnings before servicing the projector.
Details necessary tools and specialized test equipment required for maintenance.
Specifies recommended lubricants and their application points for projector components.
Provides guidance and steps for troubleshooting common projector operational issues.
Lists common electrical problems and their probable causes and remedies.
Covers symptoms, causes, and remedies related to the film loading mechanism.
Details mechanical issues, their causes, and recommended solutions.
Addresses symptoms, causes, and remedies for lamp circuit related problems.
Covers symptoms, causes, and remedies for issues within the sound system.
Explains the procedure for removing and installing the cam tank module.
Details the steps for removing and installing the projector's amplifier module.
Provides instructions for removing and installing the motor module.
Covers the procedure for removing and installing the transformer module.
Details removal/installation of film gate, lens holder, and film shoe assemblies.
Details repair and adjustment procedures for the cam tank module.
Explains how to change shutter blades for timing adjustments.
Details specifications, power supply, and circuit diagrams for the amplifier module.
Shows typical frequency response patterns for the amplifier in different modes.
Covers specifications, circuit diagrams, and operation modes for the motor module.
Explains silent film operation and frequency conversion methods for the motor pulley.
Details the transformer circuit diagram and connector pin assignments.
Covers the aperture plate (film gate) assembly and its adjustments.
Details the film shoe and bracket assembly and its adjustments for focus and pressure.
Details the take-up arm's description, torque adjustment, and clutch mechanism.
Describes the supply arm's function and lack of adjustments.
Explains the lower loop setter system description and its operational sequence.
Describes the film loading mechanism's operation sequence.
Explains the rewinding mechanism's function and adjustment procedures.
Details the upper loop roller and film guard function and adjustment.
Covers film gate opening and closing adjustments and alignment.
Explains the retraction mechanism of the cam claw and related issues.
Refers to the lower loop setter system for correct loop formation.
Details buzz roller tension and position for optimal sound quality.
Describes the tension roller's function and adjustment for film stabilization.
Covers the adjustment of the #2 sprocket shoe assembly.
Explains the rewind system's description and adjustment procedures.
Details the sound drum and flywheel assembly's function and adjustments.
Provides steps for optical sound focusing alignment and testing.
Details the magnetic sound playback system and its alignment procedure.
Explains the lamp circuit, its voltage, and lamp types.
Covers lamp replacement, alignment, and heat shield procedures.
Provides an overview of the electrical system, function switches, and wiring.
To Next Page
