Einhell Royal RBK 3735 User Manual (English)

Questions and Answers:

L
lorrainehenryAug 14, 2025
What to do if my Einhell Royal Chainsaw won’t start?
- L
  lsolisAug 14, 2025
  If your Einhell Royal Chainsaw unit won’t start, or starts but won't run, it may be due to several reasons. You might be using incorrect starting procedures, so double-check the user manual. The carburetor mixture adjustment setting may be incorrect, requiring adjustment by an Authorized Service Center. The spark plug could be fouled and needs cleaning, gapping, or replacement. Finally, the fuel filter might be plugged, in which case you should replace it.
C
Christy SimpsonAug 17, 2025
Why does my Einhell Royal Chainsaw start but have low power?
- L
  Laura HarrisonAug 17, 2025
  If your Einhell Royal Chainsaw starts but the engine has low power, check the choke lever position and move it to the RUN position. Also, a dirty air filter can cause this issue; remove, clean, and reinstall the filter. An incorrect carburetor mixture adjustment setting can also be the cause; have it adjusted by an Authorized Service Center.
E
Edward SimmonsAug 21, 2025
Why does my Einhell Royal RBK 3735 Chainsaw smoke so much?
- M
  Melanie SheaAug 21, 2025
  If your Einhell Royal Chainsaw smokes excessively, the problem may be an incorrect fuel mixture. Ensure you are using properly mixed fuel (50:1 mixture).
M
Mark ReyesAug 25, 2025
What to do if my Einhell Royal Chainsaw engine dies?
- S
  Shaun TuckerAug 25, 2025
  If your Einhell Royal Chainsaw engine dies, check if the petrol tank is empty and fill it up. Also, make sure the fuel filter is correctly positioned in the tank, and reposition it if necessary.
L
lisa87Aug 27, 2025
Why does my Einhell Royal RBK 3735 Chainsaw have poor performance?
- J
  Joshua GoodmanAug 27, 2025
  If your Einhell Royal Chainsaw has poor performance when operated, it could be due to a blunt or loose chain. Sharpen or replace the chain if it's blunt, and tension the chain if it's loose.
T
Teresa CampbellAug 30, 2025
How to fix insufficient chain lubrication on Einhell Royal Chainsaw?
- S
  Sheila RubioAug 30, 2025
  If your Einhell Royal Chainsaw has insufficient chain lubrication, causing the cutter rail and chain to get hot, top up the oil tank for the chain. Also, clean the oil lubrication hole in the cutter bar and the groove in the cutter bar.
B
blakepriscillaSep 3, 2025
Why does my Einhell Royal RBK 3735 Chainsaw hesitate?
- C
  Christine ThomasSep 3, 2025
  If your Einhell Royal Chainsaw hesitates, the cause may be an incorrect carburetor mixture adjustment setting. Have the carburetor adjusted by an Authorized Service Center.
G
Glenda HarrisSep 6, 2025
What to do if Einhell Royal Chainsaw has no power under load?
- D
  donna57Sep 6, 2025
  If your Einhell Royal Chainsaw has no power under load, the spark plug might be incorrectly gapped. Clean, gap, or replace the plug.
C
challSep 9, 2025
Why does my Einhell Royal Chainsaw run erratically?
- D
  dguzmanSep 10, 2025
  If your Einhell Royal Chainsaw runs erratically, the cause may be an incorrect carburetor mixture adjustment setting. Have the carburetor adjusted by an Authorized Service Center.