To Next PageTo Next PageWhy Einhell Royal MKS 38 won't start?
Your Einhell Royal Chainsaw might not be starting due to incorrect starting procedures, an incorrectly adjusted carburetor mixture, a fouled spark plug, or a plugged fuel filter. Refer to the User Manual for correct starting procedures. Have the carburetor adjusted by an Authorized Service Center. Clean, gap, or replace the spark plug. Replace the fuel filter.
What to do if Einhell Royal MKS 38 smokes excessively?
If your Einhell Royal Chainsaw is smoking excessively, it could be due to an incorrect carburetor mixture adjustment setting or an incorrect fuel mixture. Have the carburetor adjusted by an Authorized Service Center. Use properly mixed fuel (40:1 mixture).
Why Einhell Royal MKS 38 engine has low power?
If your Einhell Royal Chainsaw starts but has low power, it could be due to the incorrect lever position on the choke. Move it to the RUN position. Other possible causes are a dirty spark arrester screen (replace it), a dirty air filter (remove, clean, and reinstall it), or an incorrectly adjusted carburetor mixture setting (have it adjusted by an Authorized Service Center). It is also possible that the distance between the rotor and the ignition coil has changed; in this case, arrange for an authorized Customer Service workshop to adjust the distance between the rotor and the ignition coil to 0.3-0.4 mm.
What to do if Einhell Royal Chainsaw runs erratically?
If your Einhell Royal Chainsaw runs erratically, the spark plug may be incorrectly gapped. Clean, gap, or replace the spark plug.
How to fix Einhell Royal Chainsaw engine that hesitates and has no power under load?
If your Einhell Royal Chainsaw engine hesitates and has no power under load, it may be caused by an incorrect carburetor mixture adjustment setting. Have the carburetor adjusted by an Authorized Service Center.
General| Brand | Einhell Royal |
|---|---|
| Model | MKS 38 |
| Category | Chainsaw |
| Language | English |
Details the procedure for installing the guide bar, saw chain, and clutch cover.
Explains how to properly adjust the tension of the saw chain for optimal performance.
Stresses the importance of lubricating the chain and bar for longevity.
Lists essential checks to perform before starting the engine of the chain saw.
Provides a step-by-step guide on how to start the chain saw engine.
Outlines the procedure for restarting a warm chain saw engine.
Details the operational test procedure for the chain brake.
Outlines a program for regular inspection and care to maintain the saw.
