GB
15
NOTE: Low-kickback saw chain is chain that has met the
kickback performance.
A safety sign is fitted to the chain saw’s fan filter cover.
This label, along with the safety instructions on these
pages, should be carefully read before attempting to
operate this unit.
• HOW TO READ SYMBOLS AND COLORS (FIG. 1)
GREEN RECOMMENDED
Recommended cutting proce-
dure.
WARNING
1. Beware of kick back.
2. Do not attempt to hold saw
with one hand.
3. Avoid bar nose contact.
RECOMMENDED
4. Hold Saw properly with both
hands.
• DANGER! BEWARE OF KICKBACK!
KICKBACK may occur when the NOSE or TIP of the
guide bar touches an object, or when wood closes in and
pinches the saw chain in the cut.
Tip contact in some cases may cause a lightning-fast
reverse reaction, kicking the guide bar up and back
toward the operator.
PINCHING the saw chain along the BOTTOM of the
guide bar may PULL the saw forward away from the
operator. PINCHING the saw chain along the TOP of the
guide bar may PUSH the guide bar rapidly back toward
the operator.
Any of these reactions may cause you to lose control of
the saw, which could result in serious personal injury.
TECHNICAL DATA
Engine displacement 35 cm
3
Maximum drive power 1.4 kW
Cutter rail length 33 cm
Cutting length 14”/35 cm
Chain gap 9,53 mm
Chain thickness 1.27 mm
Idle speed < 3,100 min
-1
max. Speed 11000 min
-1
Tank capacity 296 ml
Oil tank capacity 180 ml
Anti-vibration function Yes
Teeth 6
Chain brake Yes
Clutch Yes
Automatic chain lubrication Yes
Low-kickback chain Yes
Net weight without chain and chain bar 5.1 kg
Net weight 5,88 kg
Petrol consumption 800 g/kWh
Sound pressure level at Ear 106 dB(A)
Sound power level 111 dB(A)
Guarantee Sound power level 116 dB(A)
Braking time from working speed 0.12 s
Vibration 12 m/s
2
Saw chain
Oregon 91PJ049X or Carlton N150C-K-49E
Chainbar
Oregon 140SDEA318 or Mercury 9040-310107
IMPORTANT SAFETY
WARNING: RED Used to warn that an
unsafe procedure should not be performed.
1
3
2
4
Fig. 1
WARNING: Kickback can lead to dangerous
loss of control of the chain saw and result in
serious or fatal injury to the saw operator or to
anyone standing close by. Always be alert.
Rotational kickback and pinch-kickback are
major chain saw operational dangers and the
leading cause of most accidents.
Fig. 2A
Fig. 2B
A
A
B
A
A
B
C
BEWARE OF:
ROTATIONAL KICKBACK THE PUSH
(Fig. 2A) (PINCH KICKBACK)
AND PULL REACTIONS
(Fig. 2B)
A = Kickback path A = Pull
B = Kickback reaction zone B = Solid objects
C = Push
To Next Page
Loading...
