EINHELL MKS 38/41 User Manual (English)

Questions and Answers:

J
Jessica DeckerAug 12, 2025
Why won't my EINHELL Chainsaw start?
- S
  snguyenAug 12, 2025
  Your EINHELL Chainsaw might not start due to incorrect starting procedures, an incorrectly adjusted carburetor mixture, a fouled spark plug, a plugged fuel filter, or an altered distance between the rotor and the ignition coil. Refer to the User Manual for correct starting procedures. If that doesn't help, have the carburetor adjusted by an Authorized Service Center, clean/gap or replace the spark plug, replace the fuel filter, or arrange for an authorized Customer Service workshop to adjust the distance between the rotor and the ignition coil to 0.3-0.4 mm.
D
Douglas NelsonAug 16, 2025
What to do if my EINHELL MKS 38/41 Chainsaw won’t start?
- M
  Mary HarrisAug 16, 2025
  If your EINHELL Chainsaw won't start or starts but won't continue running, several factors could be at play. First, ensure you are following the correct starting procedures as outlined in the User Manual. A fouled spark plug could also be the culprit; try cleaning, gapping, or replacing it. Additionally, a plugged fuel filter can prevent the engine from running, so consider replacing it. If the distance between the rotor and the ignition coil has changed, arrange for an authorized Customer Service workshop to adjust the distance between the rotor and the ignition coil to 0.3-0.4 mm. Finally, the carburetor mixture adjustment setting may be incorrect, and you should have it adjusted by an Authorized Service Center.
C
Charles RiveraAug 20, 2025
What to do if my EINHELL MKS 38/41 engine has low power?
- K
  Kimberly MillerAug 20, 2025
  If your EINHELL Chainsaw starts but has low power, it could be due to the incorrect lever position on the choke, a dirty spark arrester screen, a dirty air filter, or an incorrectly adjusted carburetor mixture. Move the choke lever to the RUN position, replace the spark arrester screen, remove, clean and reinstall the air filter, or have the carburetor adjusted by an Authorized Service Center.
M
millerjoanneAug 25, 2025
Why does my EINHELL MKS 38/41 Chainsaw start but have low power?
- L
  lschultzAug 25, 2025
  If your EINHELL Chainsaw starts but the engine has low power, there are several possible causes. First, check the choke lever position and ensure it is set to the RUN position. A dirty spark arrester screen can also reduce engine power, so replace the spark arrester screen. Additionally, a dirty air filter can restrict airflow, so remove, clean, and reinstall the filter. Finally, an incorrect carburetor mixture adjustment setting may be the cause and you should have it adjusted by an Authorized Service Center.
E
Elijah HillAug 27, 2025
Why does my EINHELL MKS 38/41 Chainsaw smoke excessively?
- F
  Felicia BellAug 27, 2025
  Excessive smoke from your EINHELL Chainsaw may be due to an incorrectly adjusted carburetor mixture or an incorrect fuel mixture. Have the carburetor adjusted by an Authorized Service Center and ensure you are using properly mixed fuel (40:1 mixture).
C
Colton MendezAug 31, 2025
Why does my EINHELL MKS 38/41 engine hesitate and has no power under load?
- B
  Brian SanchezAug 31, 2025
  If your EINHELL Chainsaw engine hesitates and lacks power under load, it may be due to an incorrectly adjusted carburetor mixture setting. Have the carburetor adjusted by an Authorized Service Center.
C
Christopher GrossSep 4, 2025
What to do if my EINHELL MKS 38/41 Chainsaw runs erratically?
- L
  lorijohnsSep 4, 2025
  If your EINHELL Chainsaw runs erratically, it could be due to an incorrectly gapped spark plug. Clean/gap or replace the spark plug.
G
Gary SmithSep 7, 2025
Why is my EINHELL MKS 38/41 smoking excessively?
- J
  Jose RoweSep 8, 2025
  If your EINHELL Chainsaw smokes excessively, the issue might stem from an incorrect carburetor mixture adjustment setting, which requires adjustment by an Authorized Service Center. Another potential cause is an incorrect fuel mixture. Ensure you are using properly mixed fuel at a 40:1 mixture.