To Next PageTo Next PageHow to fix EINHELL AQUINNA if the motor does not start?
If the motor of your EINHELL Water Pump isn't starting, consider these possible causes: * The battery may not be correctly inserted. Remove the battery and re-insert it. * The impeller might be blocked. Take the pump apart and clean it. * The thermostat might have switched off. In this case, take the pump apart and clean it.
What to do if my EINHELL AQUINNA is not priming?
If your EINHELL Water Pump isn't priming, several factors could be the cause. Here's what to check: * Ensure the intake valve is submerged in water. * Verify the pump housing is filled with water. * Inspect the intake line for air leaks and ensure it's properly sealed. * Clean the intake valve and intake cage to remove any blockages. * Confirm that the maximum intake height isn't exceeded.
Why is the pumping rate insufficient in my EINHELL AQUINNA Water Pump?
An insufficient pumping rate in your EINHELL Water Pump could be due to several reasons: * The intake height may be too high. Check and adjust the intake height. * The intake cage might be soiled. Clean the intake cage. * The water level might be falling rapidly. Place the intake valve lower down. * Foreign bodies might be reducing the pump's performance. Clean the pump and replace any worn parts. * The battery performance might be decreasing. Check the battery performance and charge it if necessary.
What to do if the thermostat switches off my EINHELL AQUINNA?
If the thermostat is switching off your EINHELL Water Pump, it's likely because the motor is overloaded. To resolve this, dismantle and clean the pump, and take measures to prevent the intake of foreign bodies by using a filter.
General| Proper use | Garden |
|---|---|
| Product color | Black, Red |
| Suitable for outdoor use | - |
| Flow rate | 3000 l/h |
| Maximum suction height | 8 m |
| Maximum delivery height | 26 m |
| Maximum operating pressure | 2.6 bar |
| Maximum input water temperature | 35 °C |
| Package depth | 280 mm |
| Package width | 475 mm |
| Package height | 285 mm |
| Package weight | 4650 g |
| Power source type | Battery |
| Carrying handle(s) | Yes |
Weight and Dimensions| Weight | 3300 g |
|---|
Covers safety for lithium-ion batteries and explains symbols used in the manual, referencing Fig. 5.
Details the pump's physical components (Layout, Fig. 1) and lists items included in the delivery.
Outlines intended uses like garden irrigation and specifies suitable transport media for the pump.
Provides essential specifications including voltage, dimensions, maximum performance, and protection class.
Guides on proper attachment of intake and discharge hoses, including valve requirements.
Explains how to fit the battery pack and details the steps for charging it, including indicator lights.
Covers checking battery charge level and operating the pump using the On/Off/Pump setting switch.
Details the initial priming process and provides instructions for clearing blockages and general care.
Guides on ordering replacement parts and the environmentally responsible disposal of the equipment.
