EasyManua.ls Logo

EINHELL GE-DW 1100 N-A - User Manual

EINHELL GE-DW 1100 N-A
110 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GE-DW 1100 N-A
Art.-Nr.: 41.709.35 I.-Nr.: 11017
9
D Originalbetriebsanleitung
Tiefbrunnenpumpe
GB Original operating instructions
Deep well pump
F Instructions d’origine
Pompe pour les puits profonds
I Istruzioni per l’uso originali
Pompa per pozzo
CZ Originální návod k obsluze
Čerpadlo do hloubkových studní
SK Originálny návod na obsluhu
Hĺbkové studňové čerpadlo
E Manual de instrucciones original
Bomba para pozos profundos
RUS Оригинальное руководство по
эксплуатации
Артезианский насос
H Eredeti használati utasítás
Mélykútí szivattyú
RO Instrucţiuni de utilizare originale
Pompă pentru puţuri adânci
GR Πρωτότυπες Οδηγίες χρήσης
Αντλια φρεατιου
Anl_GE_DW_1100_N_A_SPK9.indb 1Anl_GE_DW_1100_N_A_SPK9.indb 1 15.06.2018 09:53:0015.06.2018 09:53:00

Table of Contents

Questions and Answers

  • E
    Emily KerrAug 10, 2025
    What to do if EINHELL GE-DW 1100 N-A switches off after briefly running?
    • N
      Nancy NelsonAug 11, 2025
      If your EINHELL Water Pump switches off shortly after starting, it could be due to: 1. The motor circuit-breaker activating because of excessive water contamination. To fix this, unplug the power and clean the equipment and shaft. 2. The water temperature being too high, causing the motor circuit-breaker to switch off the equipment. Make sure the water temperature doesn't exceed the maximum permissible temperature of 35 °C.
  • B
    bdavisAug 17, 2025
    What to do if EINHELL Water Pump does not pump?
    • L
      Lisa KingAug 18, 2025
      If your EINHELL Water Pump isn't pumping water, there are a couple of potential reasons: * The intake sieve might be clogged. Clean it with a water jet. * The discharge hose could be kinked. Straighten the hose to remove any kinks.
  • P
    peckjeffreyAug 26, 2025
    How to troubleshoot EINHELL GE-DW 1100 N-A that does not start?
    • J
      Jeffrey MillerAug 26, 2025
      If your EINHELL Water Pump isn't starting, the most likely cause is that the power supply isn't connected. Check the power supply to ensure it's properly connected.
  • L
    leelindaSep 2, 2025
    Why EINHELL GE-DW 1100 N-A has insufficient pumping rate?
    • T
      Tiffany RodriguezSep 3, 2025
      An insufficient pumping rate in your EINHELL Water Pump can occur due to: * A clogged intake sieve. To resolve this, clean the intake sieve. * Reduced performance from heavily contaminated and abrasive water impurities. In this case, clean the equipment and replace any worn parts.

EINHELL GE-DW 1100 N-A Specifications

General IconGeneral
BrandEINHELL
ModelGE-DW 1100 N-A
CategoryWater Pump
LanguageEnglish

Related product manuals