EINHELL BT-IW 160 User Manual


Bedienungsanleitung
Schweißgerät

Operating Instructions
Welding Set

Használati utasítás
Hegesztőkészülék
Bf
Upute za uporabu
uredjaja za zavarivanje
4
Uputstvo za upotrebu
Aparat za zavarivanje

 Vor Inbetriebnahme Bedienungsanleitung und
Sicherheitshinweise lesen und beachten
 Read and follow the operating instructions and safety information
before using for the first time.
 Üzembehelyezés előtt elolvasni és figyelembe venni a használati
utasítást és a biztonsági utasításokat.
Bf Prije puštanja u rad pročitajte i pridržavajte se ovih uputa za uporabu
i sigurnosnih napomena.
4 Prije puštanja u pogon pročitajte i uvažite uputstva za upotrebu i
napomene bezbednosti.
Art.-Nr.: 15.441.21 I.-Nr.: 01018
BT-IW
160
Anleitung_BT_IW_160_SPK1:_ 24.07.2008 13:18 Uhr Seite 1

EINHELL BT-IW 160 Specifications

General

Mains voltage	230 V
Welding current I2 (max.)	160 A
Electrode diameter	1.6 - 4.0 mm
No-load voltage U0	48 V
Fuse	16 A
Input voltage	230 V
Frequency	50 Hz
No-load voltage	48 V
Protection class	IP21
Welding current I2	160 A
Welding current range	55 A - 160 A

Summary

Device Layout

Included Items

Lists the items included with the welding set.

Important Usage Information

General advice and importance of reading instructions.

General Safety Information

Crucial safety guidelines for operating the welding set.

Correct Application

Arc Welding Hazards

Details various hazards associated with arc welding.

Symbols and Technical Specifications

Workplace Safety: Constricted/Wet Areas

Precautions for working in challenging environments.

Protective Clothing

Recommendations for protective attire during welding.

Arc Radiation and Burn Protection

Measures to protect against arc radiation and burns.

Carrying Strap Fitting

Initial Setup

Mains Power Connection

Instructions for connecting the welding set to the power source.

Welding Cable Connection

Steps for connecting the welding cables correctly.

Welding Preparation Steps

Welding Procedures

Coated Electrode Welding

Detailed guide for arc welding with coated electrodes.

TIG Welding

Instructions for welding using TIG equipment.

Overheating Protection and Fuse

Machine Maintenance

Replacement Parts Ordering

Disposal and Recycling

Warranty Information

Guarantee Terms and Conditions

Outlines additional guarantee rights and statutory warranty.

Warranty Coverage and Exclusions

Details warranty coverage and exclusions, including misuse.

Guarantee Period and Claim Process

Specifies the guarantee period, claim submission, and non-extension policy.

How to Submit a Warranty Claim

Instructions on how to submit a guarantee claim with necessary documentation.