GB
- 12 -
3. Proper use
The impact screwdriver is a handy pneumatic
tool for use in DIY and automotive workshops. It
is ideal for fastening and releasing threaded con-
nections on motor vehicles (wheels etc.) and on
farming equipment.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Repairs and maintenance work are to be carried
out only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you
use a hose that has too small an inner diame-
ter or which is too long.
4. Technical data
Release torque max. ................................312 Nm
Working range (max. thread size).................. M14
Permissible working pressure max. ........... 6.3 bar
Idle speed ...........................................7250 min
-1
Vibration aw .............................................2.6 m/s
2
Square drive ............................................1/2 inch
Air consumption .................................... 114 l/min.
Recommended hose diameter internal ..... 10 mm
Weight.........................................................2.3 kg
Air quality
cleaned and oiled
Air supply
via conditioning unit with fi lter pressure reducer
and mist oiler
Compressor capacity
approx. 250 l/min. equivalent to a motor rating of
2.2 kW
Work settings
6 bar working pressure set at the pressure
reducer or fi lter pressure reducer
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 792-6.
L
pA
sound pressure level ..................... 84,4 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level ....................... 95,4 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
Anl_DL_Schlagschrauber_SPK9.indb 12Anl_DL_Schlagschrauber_SPK9.indb 12 05.05.2017 07:13:1905.05.2017 07:13:19
To Next Page
Loading...
Need help?
General
