EINHELL ERGO TOOL E-BH 950 User Manual

E-BH 950

Bedienungsanleitung
Bohrhammer

Operating Instructions
Hammer Drill

Manual de instrucciones
Martillo perforador

Manual de instruções
Martelo perfurador

Istruzioni per l’uso
Trapano battente

Bruksanvisning
Borrhammare

Brugsanvisning
Borehammer

Käyttöohje
Iskuporakone

Navodila za upora
Udarni vrtalnik

Naputak za uporabu
Bušilica s čekićem

Használati utasítás
Fúrókalapács

Instrukcja obsługi
Młot udarowo-obrotowy

Art.-Nr.: 44.720.71 I.-Nr.: 01014
Anleitung E-BH 950 SPK 7 04.08.2004 9:06 Uhr Seite 1

EINHELL ERGO TOOL E-BH 950 Specifications

General

Power	950 W
Impact rate	0-48000 bpm
Drilling capacity in wood	30 mm
Drilling capacity in concrete	16 mm
No-load speed	0 - 3000 rpm
Chuck size	13 mm
Idle speed	0-3000 rpm

Summary

Preparations

Proper use

Tool is designed for hammer drilling in concrete, rock, brick, and chiseling work.

Fitting and changing a bit

Clean and lubricate the bit before inserting it into the chuck.

Removing a bit

Pull back locking sleeve, hold, and remove the bit.

Starting up

Switching on and off

Operate the On/Off switch to turn the hammer drill on or off.

Additional handle

Always use the additional handle for safe posture and secure operation.

Drilling depth and accessories

Set drilling depth and attach dust collector for specific tasks.

Operation modes

Select hammer stop or rotation stop for different drilling or chiseling functions.

Maintenance