EINHELL GC-SC 36/31 Li-Solo User Manual

GB
- 27 -
11. Troubleshooting guide
Fault Possible causes Rectifi cation
Motor does not start a) Internal terminals disconnected
b) Safety lock-off defective
c) Scarifi er housing clogged
d) Safety plug is not connected
e) Battery is not correctly inserted
a) By customer service workshop
b) By customer service workshop
c) Change the scarifying depth if
necessary; clean the housing so
that the spike drum can move freely
d) Connect safety plug (see 6.)
e) Remove battery and insert again
(see 5.)
Engine performance
drops
a) Soil is too fi rm
b) Housing clogged
c) Roller badly worn
a) Change working depth
b) Clean housing
c) Replace roller
Imprecise scarifying
result
a) roller worn
b) Wrong working depth
a) Replace roller
b) Correct working depth
Motor is running,
roller is not
rotating
a) Toothed belt is torn a) By customer service workshop
Important notice! To protect the motor itis equipped with a thermal overload switch which cuts
out when overloaded and starts again automatically after a short cooling-down period.
Anl_GC_SC_36_31_Li_Solo_SPK9.indb 27Anl_GC_SC_36_31_Li_Solo_SPK9.indb 27 20.09.2018 15:41:3620.09.2018 15:41:36

EINHELL GC-SC 36/31 Li-Solo Specifications

General

Type	Drum vacuum
Hose length	2.5 m
Cleaning type	Dry&wet
Dust capacity	30 L
Hose diameter	36 mm
Product color	Black, Grey, Red
Tube material	The material the tube is made of.
Number of wheels	4 wheel(s)
Container material	Stainless steel
Dust container type	Dust bag
Proper use	Home, Professional
Noise level	90 dB
Cleaning surfaces	Carpet, Hard floor
Vacuum air filtering	-
Dirt separating method	Filtering
Power source	Battery
Variable power	Yes
Battery voltage	36 V
Maximum input power	- W
Annual energy consumption	- kWh
Cord length	- m

Weight and Dimensions

Depth	463 mm
Width	385 mm
Height	635 mm
Weight	8030 g
Package weight	11370 g