To Next PageTo Next PageHow to reduce spray mist from my EINHELL GE-WS 18/75 Li Paint Sprayer?
If you're experiencing too much spray mist with your EINHELL Paint Sprayer, it could be that the distance from the object is too great; try reducing the spraying distance. Alternatively, the spray width might be too broad; reduce the spray width.
Why won't the motor start on my EINHELL GE-WS 18/75 Li Paint Sprayer?
If the EINHELL Paint Sprayer's motor isn't starting, it could be due to several reasons. First, ensure that the equipment is switched on by setting the On/Off switch to “I”. Another potential cause is a loose connection on the motor, which would require a service center to check the equipment. Lastly, check if the battery is correctly inserted; remove and reinsert it properly.
What to do if my EINHELL Paint Sprayer isn't spraying properly even with a full tank?
If your EINHELL Paint Sprayer isn't spraying or has reduced power despite a full tank, the issue could stem from a few causes. Start by cleaning the nozzle, as it might be completely or partly clogged. Another reason may be that the filter element in the handle is soiled, so clean it. Lastly, the liquid you're using might be too viscous; if so, remove the liquid, then clean the equipment and tank.
What to do if the motor on my EINHELL GE-WS 18/75 Li stops suddenly?
If the motor of your EINHELL Paint Sprayer stops suddenly, it's likely because the battery is empty. Insert a charged battery to resolve this issue.
General| Power Source | Battery |
|---|---|
| Battery Voltage | 18 V |
| Max Flow Rate | 750 mL/min |
| Weight | 1.5 kg |
| Max. delivery rate | 750 mL/min |
| Battery Type | Li-ion |
| Tank volume | 1.0 l |
| Container Capacity | 1.0 l |
General safety rules for electric gardening appliances including environmental conditions, personal safety, and proper attire.
Safety guidelines for handling, charging, storing, and dealing with damaged battery packs to prevent fire and injury.
Safety guidelines for handling pesticides and spray solutions, including protective measures and proper application.
Restrictions on operating temperature, liquid types, and flammability to ensure safe sprayer operation.
Specifies approved liquids for spraying and limitations regarding viscosity, temperature, and chemical properties.
Guide on preparing spray solutions, filling the tank with liquids, and handling the measuring cup.
How to operate the spray trigger, including locking it for continuous spraying.
How to operate the spray trigger, including locking it for continuous spraying.
Guide to adjusting the spray nozzle for different spray patterns, from a single jet to a wide mist.
Step-by-step process for cleaning the inside of the spray tank, including flushing and drying.
How to clean the spray nozzle and adjustable spray head if they become clogged with foreign bodies.
