To Next PageTo Next PageHow to reduce spray mist from EINHELL Paint Sprayer?
If you're getting too much spray mist from your EINHELL Paint Sprayer, it could be due to the distance from the object being too great or the spray width being too wide. Try reducing the spraying distance and reducing the spray width.
What to do if EINHELL GE-WS 18/35 Li Paint Sprayer does not spray or sprays at reduced power?
If your EINHELL Paint Sprayer isn't spraying properly despite a full tank, it could be due to a clogged nozzle or using a liquid that's too thick. Try cleaning the nozzle. If that doesn't work, remove the liquid, and clean the equipment and container.
Why does my EINHELL Paint Sprayer motor stop suddenly?
The motor of your EINHELL Paint Sprayer might stop suddenly if the battery is dead. Insert a charged battery.
Why won't my EINHELL Paint Sprayer motor start?
If the motor of your EINHELL Paint Sprayer isn't starting, there could be a few reasons: * The equipment might not be switched on. Turn the On/Off switch to “I”. * There might be loose connections on the motor. Have the equipment checked by a customer service workshop. * The battery might not be correctly inserted. Remove and reinsert the battery.
General| Power Source | Cordless |
|---|---|
| Battery Voltage | 18 V |
| Viscosity | Up to 70 DIN-sec |
| Technology | Airless |
| Battery Type | Li-Ion |
| Tank volume | 800 ml |
| Tank Capacity | 0.8 L |
| Spray Pattern | Horizontal / Vertical / Round Jet |
Recommends wearing a mask, safety goggles, gloves, and sturdy shoes.
Advises reading instructions, avoiding rain, and protecting from dampness.
Emphasizes reading all instructions, wearing suitable clothing, and avoiding hazardous substances.
Details the sprayer's parts with reference to figures.
Lists all items included in the product packaging.
Specifies approved liquids for spraying, limitations, and prohibited uses.
Provides detailed specifications including power, capacity, flow rate, pressure, weight, and operating parameters.
Details sound pressure and power levels, and vibration emission values according to standards.
Instructions for connecting the spray tube and hose to the spray gun handle and housing.
Steps to attach and adjust the shoulder strap for comfortable use.
Guide on inserting the battery and the process for charging it.
Explains the meaning of different LED states for battery charge status.
Guidelines for preparing and mixing spray solutions, including container capacity limits.
Instructions on how to power the sprayer on and off using the switch.
General guidance and warnings for the spraying operation itself.
How to start, stop, and lock the spray trigger for continuous spraying.
How to adjust the nozzle for a narrow jet or a wide spray pattern.
Instructions to extend the telescopic spray tube to the desired length.
Methods for carrying the equipment safely using the handle or strap.
How to clean the exterior of the sprayer, keeping vents clear.
Steps to flush the inside of the spray container with water after use.
Procedure for cleaning clogged nozzles and spray heads with wire and water.
Information required when ordering replacement parts for the equipment.
Recommendations for storing the equipment in a dry and dark place at suitable temperatures.
Safety measures to take when transporting the equipment, including using shipping protectors.
