EINHELL RT-TS 2031 U - User Manual


Originalbetriebsanleitung
Tischkreissäge

Original operating instructions
Bench-Type Circular Saw

Mode d’emploi d’origine
Scie circulaire à table de menuisier

Istruzioni per l’uso originali
Sega circolare da banco

Original betjeningsvejledning

Bordrundsav

Original-bruksanvisning
Bordscirkelsåg
B
Originalne upute za uporabu
f
stolne kružne pile
4
Originalna uputstva za upotrebu
Stona kružna testera
j
Originální návod k obsluze
Univerzální kotoučová pila
W
Originálny návod na obsluhu
Stolná kotúčová píla

Art.-Nr.: 43.071.53 I.-Nr.: 01017
RT-TS 2031 U
Anleitung_RT_TS_2031_U_SPK1__ 07.08.14 13:51 Seite 1

EINHELL RT-TS 2031 U Specifications

General

Power	2000 W
Weight	44.2 kg
Swivelling range of saw blade	45 °
Max. Power (S6 | S6%)	2000 W
Mains supply	230 V

Summary

Safety Regulations and Warnings

Product Layout and Components

Intended Use and Limitations

Technical Data and Specifications

Key Machine Specifications

Electrical, dimensional, and performance characteristics of the saw.

Pre-Operation Checks and Setup

Assembly Instructions

Setting Up the Saw

Instructions for placing and securing the saw table and its base.

Installing Table Length Extension

Using the Chassis for Transport

Saw Blade Guard Fitting and Removal

Setting the Splitter

Saw Operation Guide

Adjusting Cutting Depth

Using the Parallel Stop

Guidance on using the parallel stop for longitudinal cuts.

Using the Cross Stop

Instructions for using the cross stop for cross cuts.

Setting the Blade Angle

Cutting Operations

Making Longitudinal Cuts

Procedures for slitting wood along the grain.

Making Cross Cuts

Steps for performing cross cuts on workpieces.

Cleaning, Maintenance, and Parts

Cleaning the Saw

Routine Maintenance

Product Guarantee Certificate