To Next PageTo Next Page
Need help?Do you have a question about the EINHELL RT-XM 305 U and is the answer not in the manual?
Details the layout of the drag, crosscut, and miter saw components.
Details the layout of the base frame components.
Sound and vibration values measured according to EN 13898 standards.
Advises wearing ear protection due to noise impact causing hearing damage.
Provides general information and precautions before operating the equipment.
Instructions for assembling the saw unit and its various components.
Detailed steps for assembling the base frame and attaching the saw.
Guides for precise adjustment of the stop for 90-degree crosscuts.
Guides for precise adjustment of the stop for 45-degree miter cuts.
Guide for performing cross cuts at 90 degrees with a 0 degree turntable setting.
Instructions for cross cuts at 90 degrees with variable turntable angles.
Instructions for making miter cuts at 0°-45° with a 0° turntable setting.
Instructions for double miter cuts with 0°-45° turntable and 0°-52°/60° angles.
Procedure for adjusting and setting the cutting depth limiter.
Information on using and emptying the chip collection box.
Step-by-step guide on how to safely replace the saw blade.
Procedures for cleaning the saw and its components.
Information regarding carbon brushes and when to check them.
Notes on internal maintenance requirements for the equipment.
Details on how to order spare parts, including required information.
General