To Next PageTo Next Page
Need help?Do you have a question about the EINHELL RT-TS 920 and is the answer not in the manual?
General| Power | 900 W |
|---|---|
| Blade Diameter | 200 mm |
| Idle speed max | 4800 rpm |
| Saw blade bore | 16 mm |
| Swiveling range of saw blade | 45° |
| Max. cutting height at 45° | 27 mm |
| Max. cutting height at 90° | 45 mm |
| Height adjustment | Yes |
| Parallel stop | Yes |
| Angle stop | Yes |
| Dust extraction adapter | Yes |
| No-Load Speed | 4800 rpm |
| Rip Fence | Yes |
| Miter Gauge | Yes |
| Type | Table saw |
| Cutting Depth | 45 mm |
Primary operating instructions for the Bench-Type Circular Saw.
General safety rules and precautions for operation.
Instructions for assembling the machine.
Step-by-step guide for installing the saw blade.
Instructions for setting the saw blade splitter.
How to turn the saw on/off and adjust blade depth.
Using the parallel fence for cuts (height, length, width).
Setting the angle stop and using the crosscut fence.
General procedures and precautions for sawing.
