EINHELL TC-DS 19 User Manual

GB
- 17 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes, grinding/sanding plate
Consumables* Grinding/sanding paper
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.Einhell-Service.com.
Please ensure that you provide a precise description of the problem and answer the following questions
in all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_DS_19_SPK9.indb 17Anl_TC_DS_19_SPK9.indb 17 31.01.2022 10:12:2131.01.2022 10:12:21

EINHELL TC-DS 19 Specifications

General

Product color	Black, Red
Type of sander	Delta sander
Dust extraction port	Yes
Sanding media fixing	Velcro
Idle speed (max)	20000 RPM
Oscillating orbit diameter	1.2 mm
Package weight	1200 g
Power	190 W
Dust container type	Bagless
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	315 mm
Width	100 mm
Height	105 mm
Weight	1100 g
Sanding plate size (WxD)	90 x 90 mm