EINHELL TC-PG 10/E5 - Starting the Engine; Connecting Consumers to Generator; Switching Off the Engine; Cleaning, Maintenance, and Storage

GB
- 21 -
10. Troubleshooting
Fault Possible cause Remedy
Engine does not
start
Automatic oil cut-out has not
responded
No fuel
Check the oil level, top up with engine
oil
Refuel
Generator has too
little or no
voltage
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air fi lter dirty
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the fi lter
Anl_TC_PG_10-E5_SPK9.indb 21Anl_TC_PG_10-E5_SPK9.indb 21 07.11.2019 10:00:2207.11.2019 10:00:22