EINHELL TC-PL 750 User Manual

GB
- 22 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes, drive belt
Consumables* Planing knife
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_PL_750_SPK9.indb 22Anl_TC_PL_750_SPK9.indb 22 22.11.2019 06:56:0722.11.2019 06:56:07

EINHELL TC-PL 750 Specifications

General

Input power	750 W
Power source	AC
Idle speed	17000 RPM
Rebating depth	10 mm
Planning width (max)	82 mm
Soft grip	Yes
Product color	Black, Red
Soleplate material	Aluminum
Chip thickness (max)	2 mm

Weight and Dimensions

Depth	307 mm
Width	166 mm
Height	192 mm
Weight	2400 g
Package depth	180 mm
Package width	170 mm
Package height	320 mm
Package weight	2720 g