EINHELL TC-PW 610 Compact User Manual

GB
- 14 -
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Remember.
Too small a diameter of the hose and too
long a hose line will result in loss of power.
4. Technical data
Max. loosening torque .............................610 Nm
Max. torque .............................................610 Nm
Working range (max. thread size) ................ M18
Recommended operating pressure ......... 6.3 bar
Max. permissible working pressure ............ 8 bar
Idling speed ........................................9000 min
-1
Square drive mount ................12.7 mm (1/2 inch)
Air consumption .................................. 142 l/min.
Recommended hose diameter ................... 9 mm
Weight ........................................................1.2 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN ISO 15744.
L
pA
sound pressure level ........................ 95 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level ......................... 106 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) were determined in accordance with EN
ISO 12096 and EN ISO 28927-2.
Vibration emission value a
h
= 3.8 m/s
2
K uncertainty = 1.5 m/s
2
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Before you connect the equipment to the power
supply make sure that the data on the rating plate
are identical to those of the supply voltage.
Disconnect the compressed air supply before
performing any cleaning, adjusting and main-
tenance work.
Air supply:
Via a compressed air source with pressure setting
function, e.g. a compressor. Before starting up,
please also read the section on care and mainte-
nance.
Anl_TC_PW_610_Compact_SPK13.indb 14Anl_TC_PW_610_Compact_SPK13.indb 14 18.08.2021 15:04:4318.08.2021 15:04:43

EINHELL TC-PW 610 Compact Specifications

General

Drive size	- \
Torque (max)	610 N⋅m
Maximum airflow	142 l/min
Idle speed (max)	7000 RPM
Maximum operating pressure	6.3 bar
Carrying case	Yes
Product type	Air ratchet wrench
Product color	Black, Red
Built-in light	-
Power source	Compressed air

Weight and Dimensions

Depth	346 mm
Width	83 mm
Height	255 mm
Weight	2100 g
Package weight	4200 g