EINHELL TC-SY 400 P User Manual

GB
- 19 -
Danger! - Read the operating instructions to reduce the risk of injury
Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
Caution! Wear gloves.
Note! Disassemble and clean the equipment immediately after each use. This is the only way to keep
the wetted parts clean and prevent clogging. Parts that are not cleaned can become clogged, causing
an equipment fault.
Anl_TC_SY_400_500_SPK1.indb 19Anl_TC_SY_400_500_SPK1.indb 19 29.09.2016 14:24:3829.09.2016 14:24:38

EINHELL TC-SY 400 P Specifications

General

AC input voltage	220-240 V
AC input frequency	50 Hz
Capacity	0.8 L
Product color	Black, Red
Spray gun purpose	Paint
Package depth	128 mm
Package width	275 mm
Package height	256 mm
Package weight	1850 g

Weight and Dimensions

Weight	- g