EINHELL TH-SM 2131 Dual User Manual

TH-SM 2131 Dual
Art.-Nr.: 43.008.35 I.-Nr.: 11023
1
D Originalbetriebsanleitung
Zug-, Kapp- und Gehrungssäge
GB Original operating instructions
Drag, crosscut and miter saw
F Mode d’emploi d’origine
Scie à onglet radiale
I Istruzioni per l’uso originali
Sega a trazione per troncature e
tagli obliqui
S Original-bruksanvisning
Drag-, kap- och geringssåg
CZ Originální návod k obsluze
Kapovací a pokosová pila s
pojezdem
SK Originálny návod na obsluhu
Tesárska, kapovacia a pokosová
píla
Anl_TH_SM_2131_Dual_SPK1.indb 1Anl_TH_SM_2131_Dual_SPK1.indb 1 17.07.13 10:2017.07.13 10:20

EINHELL TH-SM 2131 Dual Specifications

General

Brand	EINHELL
Model	TH-SM 2131 Dual
Category	Saw
Language	English

Summary

Safety Precautions

Read Operating Instructions

Wear Hearing Protection

Importance of ear protection against noise-induced hearing damage.

Wear Respiratory Protection

Use of breathing masks for protection against harmful dust.

Wear Safety Goggles

Importance of safety goggles to prevent eye injuries from sparks or debris.

Risk of Injury: Avoid Saw Blade Contact

Caution against reaching into the running saw blade to prevent injury.

Laser Safety Guidelines

Laser Radiation Warnings

Specific guidelines and warnings for laser radiation safety.

Proper Saw Usage

Intended Use and Hazard Awareness

Defines the saw's purpose and outlines potential hazards during use.

Technical Specifications and Risks

Sound and Vibration Data

Identification of Residual Risks

Lists potential health hazards associated with equipment use.

Setup and Adjustments

Pre-Operation Checks and Safety

Essential checks before starting the equipment for safe operation.

Saw Assembly Procedure (Fig. 1-5)

Adjusting the 90° Crosscut Stop (Fig. 7-8)

Adjusting the 45° Miter Cut Stop (Fig. 1, 6, 7, 9)

Adjusting the Miter Angle (Fig. 2, 12-13)

Cutting Operations

Adjusting Movable Stop Rails (Fig. 1, 10-14)

Executing 90° Crosscuts

Performing 45° Miter Cuts

Advanced Operations and Maintenance

Performing Double Miter Cuts (Fig. 1-3, 14)

Setting Cutting Depth Limits (Fig. 15)

Saw Blade Replacement Procedure (Fig. 1, 16-18)

Detailed procedure for safely replacing the saw blade.

Utilizing the Laser Cutting Guide (Fig. 2)