EINHELL TH-TS 1525 U User Manual

TH-TS 1525 U
Art.-Nr.: 43.407.90 I.-Nr.: 11024
1
D Originalbetriebsanleitung
Tischkreissäge
GB Original operating instructions
Bench-type circular saw
F Mode d’emploi d’origine
Scie circulaire à table
I Istruzioni per l’uso originali
Sega circolare da banco
DK/ Original betjeningsvejledning
N Bordrundsav
S Original-bruksanvisning
Bordscirkelsåg
HR/ Originalne upute za uporabu
BIH Stolna kružna pila
RS Originalna uputstva za upotrebu
Stona kružna testera
CZ Originální návod k obsluze
Stolní kotoučová pila
SK Originálny návod na obsluhu
Stolná kotúčová píla
Anl_TH_TS_1525_U_SPK1.indb 1Anl_TH_TS_1525_U_SPK1.indb 1 01.07.14 16:0001.07.14 16:00

EINHELL TH-TS 1525 U Specifications

General

Power	1500 W
Blade Diameter	250 mm
Weight	18.5 kg
Max. cutting height at 45°	60 mm
Number of saw teeth	48
Swiveling range of saw blade	0° - 45°

Summary

Layout and Items Supplied

Layout Overview (Fig. 1/2)

Details the components and their placement in diagram 1/2.

Included Items

Technical Data

Assembly

Assembling the Base Frame

Instructions for assembling the base frame using legs, struts, and feet.

Using the Saw

Parallel Stop Setup

Stop Height and Cutting Width

Setting the parallel stop for material thickness and desired cutting widths.

Cross Stop and Angle Setting

Operation

Longitudinal Cuts (Figure 19)

Narrow Workpiece Cuts (Fig. 20/21)

Bevel and Cross Cuts (Fig. 14/22/23)

Performing angled and cross cuts using parallel and cross stops.