Do you have a question about the EINHELL TH-AP 650 E and is the answer not in the manual?
Power | 650 W |
---|---|
Cutting Depth | 65 mm |
Cutting depth in wood | 65 mm |
Cutting depth in steel | 6 mm |
Stroke height | 20 mm |
Cutting depth at 90° | 65 mm |
Cutting depth at 45° | 45 mm |
Step-by-step guide on how to safely replace the saw blade.
Instructions for adjusting the soleplate position for optimal use.
Details how to turn the equipment on and off using the main switch.
Explains how to use the locking button to maintain continuous operation.
How to use the wheel selector to adjust the blade speed for different materials.
Specifies warranty applicability for natural persons and statutory rights.
Instructions on how to register defective devices online and the required proof of purchase.