Need help?Do you have a question about the EINHELL TKS 18/250 UV and is the answer not in the manual?
Provides crucial safety warnings for operating the electric tool.
Lists sound pressure and sound power levels for the machine.
Step-by-step guide for assembling the base frame of the circular saw.
Instructions for extending the table width and length.
Details on attaching the length extension table.
Instructions for attaching the width extension tables.
Guide on how to fit and remove the saw blade guard.
Instructions on how to set the splitter for optimal cutting.
Procedure for replacing a worn or damaged table insert.
Steps for fitting and replacing the saw blade.
How to operate the ON/OFF switch of the saw.
How to adjust the cutting depth using the hand crank.
Information on using the parallel stop for cuts.
Adjusting the stop height of the parallel stop.
How to use the parallel stop for longitudinal cuts.
Adjusting the stop length of the parallel stop for workpiece safety.
How to use and set the cross stop for angled cuts.
How to set the cutting angle of the saw blade.
Instructions for performing longitudinal cuts along the wood grain.
Using a push stick for cutting narrow workpieces.
Using a push block for very narrow workpieces.
How to make bevel cuts using the parallel stop.
Instructions for making cross cuts using the cross stop.
To Next Page
General