EINHELL TKS 15/250 UV User Manual

Art.-Nr.: 43.406.50 I.-Nr.: 01024

Bedienungsanleitung
Tischkreissäge

Operating Instructions
Bench-Type Circular Saw

Mode d’emploi
Scie circulaire à table de menuisier

Gebruiksaanwijzing
Tafelcirkelzaag

Istruzioni per l’uso
Sega circolare da banco

Betjeningsvejledning
Bordrundsav

Instrukcja obsługi
Stołowa pilarka tarczowa

Upute za uporabu
stolne kružne pile

TKS 15/ 250 UV
®
Anleitung TKS 15-250 UV SPK1 18.08.2006 11:06 Uhr Seite 1

EINHELL TKS 15/250 UV Specifications

General

Power	1500 W
Cutting Width	250 mm
Table Size	640 x 487 mm
Number of saw teeth	24
Max. cutting height at 90°	75 mm
Diameter of suction adapter	36 mm
Working height	830 mm
No-load speed	4500 rpm
Blade diameter	250 mm
Cutting depth at 90°	75 mm
Swiveling range	0° - 45°
Saw blade	250 mm

Summary

Intended Use

Important Information

Safety Information

Provides essential safety precautions and warnings for operating electric tools.

Pre-Operation Checks and Setup

Machine Assembly

Splitter Adjustment

Adjust the splitter position relative to the saw blade for different cut types.

Saw Blade Installation and Replacement

Mount and fasten the saw blade correctly, noting the direction of rotation.

Operating the Saw

Using the Parallel Stop

Mount and adjust the parallel stop for longitudinal cuts.

Saw Operation Procedures

Using the Cross Stop

Slide the cross stop into the table groove and adjust to the required angle.

Performing Longitudinal Cuts

Cutting Narrow Workpieces Safely

Specific Cutting Techniques

Performing Cross Cuts