Function Setting Value Description
USB On
O
You can switch between enabling and disabling of the USB port of
the monitor.
• "On"
Enables the USB port. If you are using the following functions,
set this function to "On".
- Display of video signals using USB-C
- USB Hub Function
- USB Power Delivery
- Screen InStyle (monitor control)
• "O"
Disables the USB port so that USB peripheral devices cannot
be used.
Note
• By pressing the switch on the far left for three seconds or more
in the state where the power is turned on and the menu is not
displayed, you can change the setting from "O" to "On". The
same operation cannot be used to change from "On" to "O".
On-Screen Logo On
O
When the monitor is turned on, the EIZO logo appears on the
screen.
When this function is set to “O”, the EIZO logo does not appear.
Key Lock O
Menu
All
In order to prevent changes to settings, the operation switches on
the front of the monitor can be locked.
• “O” (default setting)
Enables all switches.
• “Menu”
Locks the
switch.
• “All”
Locks all switches except the power switch.
27
Chapter 4 Administrator Settings
To Next Page
Loading...
Need help?
General
