Eizo ElexScan EV2480 - User Manual

Questions and Answers

H
hollystrongSep 13, 2025
Why does the power indicator flash orange and white on my Eizo Monitor?
- M
  Mariah AllisonSep 13, 2025
  The power indicator on your Eizo monitor might flash orange and white due to: * The PC being connected to the DisplayPort connector. Use a recommended signal cable and turn the monitor off and on. * Issues with the connection or condition of USB devices connected to the monitor. * Try turning off the main power switch on the rear side of the monitor, and then turn it on again.
B
Brittney LambAug 26, 2025
How to fix a too bright or too dark screen on my Eizo ElexScan EV2480 Monitor?
- S
  Shawn HenryAug 27, 2025
  To adjust a screen that is too bright or too dark on your Eizo monitor: * Use the 'Brightness' or 'Contrast' settings in the Setting menu. * If the screen is too bright, try turning 'On' the Auto EcoView setting. This allows the monitor to automatically adjust the screen brightness based on ambient lighting.
I
isantosAug 27, 2025
Why does the brightness change on my Eizo ElexScan EV2480 Monitor by itself?
- A
  araymondAug 27, 2025
  If the brightness on your Eizo monitor changes automatically, try turning the Auto EcoView setting to 'Off'.
J
Jeffrey MartinezAug 30, 2025
What to do if text is blurred on my Eizo ElexScan EV2480?
- J
  Jennifer PerezAug 30, 2025
  If the text on your Eizo monitor appears blurred: * Ensure that your PC is configured to meet the resolution and vertical scan frequency requirements of the monitor. * Set the magnification of display on the OS to '100%'. If using multiple monitors, set the magnification to '100%' on all monitors.
H
Heather MeyerSep 1, 2025
How to resolve afterimages appearing on my Eizo Monitor?
- L
  Lisa WoodardSep 1, 2025
  Afterimages are a characteristic of LCD monitors. To minimize this on your Eizo monitor: * Avoid displaying the same image for extended periods. * Use a screen saver or the power saving function. * Change the image or turn off the power for several hours to remove the afterimage.
K
kevin99Dec 1, 2025
What to do if my Eizo ElexScan EV2480 Monitor has no picture?
- A
  Andrew SanfordDec 1, 2025
  If your Eizo monitor displays no picture, there are several things you can check: * Ensure the power cord is properly connected. * Turn on the main power switch located on the rear side of the monitor. * Touch the monitor. * Try turning off the main power switch on the rear of the monitor, wait a few minutes, and then turn it back on. * Increase the 'Brightness', 'Contrast', or 'Gain' in the Setting menu. * Switch the input signal. * Turn 'On' the 'Compatibility Mode' in the 'Administrator Settings' menu. * Move the mouse or press any key on the keyboard. * Ensure the PC is turned on. * Turn off the main power switch on the rear side of the monitor, and then turn it on again. * If connected via DisplayPort, use a recommended signal cable and try turning the monitor o...
M
Madison ShawNov 20, 2025
What does it mean when my Eizo ElexScan EV2480 Monitor displays a message saying there is no signal?
- E
  Elizabeth MartinNov 21, 2025
  If your Eizo monitor displays a message indicating no signal is being input, or that the input signal is out of the specified frequency range, or that the PC connected to the USB-C connector does not support video signal output, try the following: * Ensure the PC is turned on. * Verify that the signal cable is properly connected. * Switch the input signal. * Turn off the main power switch on the rear side of the monitor, and then turn it on again. * Set 'Auto Input Detection' to 'Off' in the 'Administrator Settings' menu and manually switch the input signal. * Ensure the PC's resolution and vertical scan frequency meet the monitor's requirements. * Reboot the PC. * Select an appropriate setting using the graphics board’s utility. * Ensure the connected cable is a recomme...
C
cjenkinsNov 23, 2025
Why are my USB devices not working when connected to my Eizo ElexScan EV2480?
- J
  Jay JacksonNov 24, 2025
  If USB devices connected to your Eizo monitor aren't working, consider these solutions: * Ensure the USB cable is correctly connected between the PC and the monitor. * Verify the USB cable is correctly connected between the peripheral and the monitor. * Try a different USB port on the monitor. * Try a different USB port on the PC. * Reboot the PC. * If 'Compatibility Mode' is 'Off' in the 'Administrator Settings' menu, and the monitor's power is off, devices connected to the USB downstream port won't work. Change 'Compatibility Mode' to 'On'. * If 'USB' is set to 'Off' in the 'Administrator Settings' menu, connected USB devices won't function. Set 'USB' to 'On'. * If the devices work when directly connected to the PC, contact your local EIZO representative. * Update to t...
M
Michelle LeSep 12, 2025
What causes interference patterns or pressure marks to remain on the LCD panel of my Eizo ElexScan EV2480?
- A
  Amanda HernandezSep 12, 2025
  If interference patterns or pressure marks remain on the LCD panel of your Eizo monitor, leave the monitor displaying a white or black screen. The symptom may disappear.
K
Keith RamirezSep 8, 2025
Why does noise appear on the screen of my Eizo ElexScan EV2480?
- C
  Caroline VaughanSep 9, 2025
  If noise appears on the screen of your Eizo monitor: * Set 'Overdrive' to 'Off' in the Setting menu. * Be aware that when inputting HDCP system signals, normal images may not be displayed immediately.

Eizo ElexScan EV2480 Specifications

General

Screen Size	23.8 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	IPS
Aspect Ratio	16:9
Brightness	250 cd/m²
Contrast Ratio	1000:1
Response Time	5 ms (Gray-to-Gray)
Refresh Rate	60 Hz
VESA Mount	100 x 100 mm
Pivot	Yes
Inputs	DisplayPort, HDMI
Viewing Angle	178° (horizontal) / 178° (vertical)
Speakers	1.0 W
Color Gamut	sRGB