14
1 INSTALLATION
Connecting two PCs to the monitor
1) Be sure that the monitor and the PC are both switched off before
connecting them.
2) Connect one PC to the monitor’s D-Sub connector and another to the
BNC connector securely. The BNC connection should be made with
an EIZO BNC cable, available as an option. Contact EIZO dealers
for information about optional cables.
(Example)
Selecting the active input
The BNC/D-Sub selection button on the front panel can be used to
select either BNC or D-Sub connection as the active input.
The ScreenManager’s “Input Priority” setting (in the “Others” menu)
can be used to set up the automatic selection of the input.
See page 31 for details.
MD-C53A (optional)
To Next Page
Loading...
