Eizo FLEXSCAN F980 - Other Settings - Others Menu; Degaussing; Input Priority

31
2 ADJUSTMENTS & SETTINGS USING THE SCREENMANAGER
E
2-5 Other Settings - Others Menu -
All of the icons shown in the ScreenManager “Others” menu are
described below.
degausses
What is degaussing?
“Degaussing” refers to the process of removing
magnetic-field effects from the monitor.
Operation of the monitor within a magnetic
field may adversely effect color purity.
Degaussing can be used to correct the problem.
• The degauss circuitry takes about 30 minutes to
regain maximum power following degaussing.
Function
selects: Input Priority
The monitor constantly checks the input signals
and switches automatically in accordance with the
“Input Priority” settings (see chart on next page).
Once a priority is set, whenever a change of signal
is detected at the selected input, the monitor will
switch the input to that signal.
If signals from both inputs are present,
the monitor gives preference to D-Sub
for the cases shown below:
• When the power of the monitor is
turned ON.
• When the signal input to D-Sub is
changed even if active input was
BNC.
If signals from both inputs are present,
the monitor gives preference to BNC for
the cases shown below:
• When the power of the monitor is
turned ON.
• When the signal input to BNC is
changed even if active input was
D-Sub.
Degaussing
Input Priority
D-Sub
BNC