47
6 SPECIFICATIONS
E
6 SPECIFICATIONS
Electrical Specifications
CRT 55 cm (21 inch) class, 90° deflection invar shadow mask
CRT with Anti-Reflective SuperErgoCoat
®
CRT Dot Pitch 0.23 mm (Horizontal: 0.20 mm)
Scan Frequency
Horizontal: 30 kHz-137 kHz (Automatic)
Vertical: 50 Hz-160 Hz (Automatic)
Max. Active Display Area 402 mm (H) × 300 mm (V) (15. 8” (H) × 11.8” (H))
(Viewable image size: 501 mm (19.7”))
* Display size can be set by the user through
microprocessor control panel.
* The actual size displayed can be dependent on the
graphics board or PC utilized.
Power Supply 100-120 VAC±10%, 50 Hz, 2.0 A
220-240 VAC±10%, 50/60 Hz, 0.9 A
Power Consumption
Normal/Max: 140 W/200 W*
(*with EIZO optional speaker & USB attached)
PowerManager Mode 1: Less than 15 W*
PowerManager Mode 2: Less than 3 W* (* When the USB hub is not connected)
Input Connector D-Sub 13W3 and BNC × 5 (switchable)
Recommended Resolution 1600 dots × 1200 lines
Input Signal
Sync: • H/V Separate, TTL, Positive/Negative
• H/V Composite, TTL, Positive/Negative
• Sync on Green 0.3 Vp-p, Negative
Video: • Analog 0.7 Vp-p/75 Ω, Positive
Plug & Play VESA DDC1/2B
Mechanical Specifications
Dimensions 494 mm (W) × 486 mm (H) × 520 mm (D)
(19.4” (W) × 19.1” (H) × 20.5” (D))
Weight 30.0 kg (66.1 lbs.)
USB Specifications
USB standard Rev. 1.0 complied self-powered hub
USB Monitor Control Class Rev. 1.0 complied
Standard
Downstream power supply 500 mA for each (Max.)
Communication speed 12 Mbps (full), 1.5 Mbps (low)
USB ports Upstream port x 1, Downstream ports x 4
Environmental Specifications
Temperature operating: 0°C to 35°C (32 °F to 95 °F)
storage: -20°C to 60°C (-4 °F to 140 °F)
Humidity 30% to 80% R.H. Non-condensing
Certifications and Standards
100-120 VAC range UL/C-UL, FCC-B, DHHS, TÜV Rheinland/Ergonomics
Approved, TCO’99, EPA Energy Star
®
Program
220-240 VAC range CE, CB, TÜV Rheinland/GS, TÜV Rheinland/Ergonomics
Approved, TCO’99, EPA Energy Star
®
Program
To Next Page
Loading...
