- 12 -
Proceed with installing the water block just follow the instruction
manual that is posted online, chapter INSTALLING THE WATER
BLOCK, page 12.
https://www.ekwb.com/shop/EK-IM/EK-IM-3831109857663.pdf
INSTALLING THE CPU WATER BLOCK
STEP 4
Apply a small drop of Thermal Grizzly Conductonaut liquid metal
paste and spread it evenly over the DIE with cotton swabs that
are included in the bag. Use the provided needle accessory that is
included in the bag. Don’t press the syringe too hard!
Use the provided needle accessory that is included in the bag. Don’t
press the syringe too hard!
For more information read the Thermal Grizzly Conductonaut
instructions.
A small drop of Thermal
Grizzly Conductonaut
liquid metal paste
STEP 4
To Next Page
Loading...